Camry V6-3.0L (1MZ-FE) (2004)
a. Install the blower assembly with the 2 screws and 2 nuts.
Torque: 1.5 N.m (15 kgf.cm, 12 in.lbf)
b. Install the 6 clamps, connect the wire harness.
c. Install the blower connector holder with the screw and clamp.
d. Connect the connectors.
35. INSTALL INSTRUMENT PANEL REINFORCEMENT
a. Install the instrument panel reinforcement with the 7 bolts and 3 caps.