Camry V6-3.0L (1MZ-FE) (2004)
Air Bag Sensor Rear RH
REPLACEMENT
HINT: Replacement procedure of the RH side is the same as that for the LH side.
1. PRECAUTION
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE REAR SEAT CUSHION ASSEMBLY
4. REMOVE REAR SIDE SEAT BACK ASSEMBLY LH
5. REMOVE AIR BAG SENSOR REAR LH
a. Disconnect the connector from the airbag sensor rear LH.
b. Remove the 2 bolts and the airbag sensor rear LH.
6. INSTALL AIR BAG SENSOR REAR LH
a. Check that the ignition switch is off.
b. Check that the battery negative (-) terminal is disconnected.