Camry V6-3.5L (2GR-FE) (2008)
Cruise Control Switch: Service and Repair
Installation
CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH:
INSTALLATION
1. INSTALL CRUISE CONTROL MAIN SWITCH
(a) Install the cruise control main switch with the 2 screws.
Torque: 2.4 Nm (24 kgf-cm, 21 in-lbf)
(b) Connect the connector.
2. INSTALL STEERING PAD (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation)
3. INSTALL LOWER NO. 2 STEERING WHEEL COVER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
4. INSTALL LOWER NO. 3 STEERING WHEEL COVER (See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation)
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT SRS WARNING LIGHT
(See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System)