Camry V6-3.5L (2GR-FE) (2008)
(a) Remove the taillight relay from the instrument panel J/B assembly.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE TAILLIGHT RELAY
OK -- Continue to next step.
4. INSPECT INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
(a) Measure the voltage according to the value(s) in the table below.
Standard voltage:
OK -- REPAIR OR REPLACE HARNESS OR CONNECTOR (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY -
BODY GROUND)
NG -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (BATTERY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)
(a) Disconnect the IA instrument panel J/B assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY