Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Wheel Speed Sensor: Service and Repair
Front
FRONT SPEED SENSOR
REMOVAL
Front Speed Sensor Connector
1. Disconnect Speed Sensor connector.
(a) Remove the fender liner.
(b) Disconnect the Speed Sensor connector.
2. Remove Speed Sensor.
Front Speed Sensor Removal
(a) Remove the bolt, flexible hose bracket and Speed Sensor harness clamp.
Torque: 29 Nm (300 kg.cm, 21 ft. lbs.)
(b) Remove the resin clip and clamp bolt holding the sensor harness to the body.
Torque: 5.4 Nm (55 kg.cm, 48 inch lbs.)
(c) Remove the Speed Sensor from the Steering Knuckle.
Torque: 7.8 Nm (80 kg.cm, 69 inch lbs.)
INSTALLATION
Installation is in the reverse order of removal.
NOTE: After installation, check Sensor Confirmation Test.
See: Testing and Inspection