Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
b. Remove the 2 bolts and 2 upper radiator supports.
c. Remove the radiator assembly.
d. Remove the 2 lower radiator supports.
e. Remove these hoses from the radiator:
^
Lower radiator hose
^
A/T: 2 oil cooler hoses
3. Remove No.1 electric cooling fan from radiator
a. Disconnect the ECT switch connector for the cooling fan.
b. Disconnect the ECT switch wire clamp for the cooling fan from the bracket of the radiator.
c. Remove the 2 bolts and cooling fan.
4. Remove no.2 electric cooling fan from radiator
^
Remove the 2 bolts and cooling fan.
Installation
1. Install no.1 electric cooling fan to radiator
(a) Attach the lower side of the cooling fan to the bracket of the radiator.
(b) Install the cooling fan with the 2 bolts.
(c) Connect the ECT switch connector for the cooling fan.
(d) Install the ECT switch wire clamp for the cooling fan to the bracket of the radiator.
Torque: 5.0 Nm (44 inch lbs.)
2. Install no.2 electric cooling fan to radiator.
(a) Attach the lower side of the cooling fan to the bracket of the radiator.
(b) Install the cooling fan with the 2 bolts.
Torque: 5.0 Nm (44 inch lbs.)
3. Install radiator assembly.
(a) Install these hoses:
^
Lower radiator hose.
^
A/T: 2 oil cooler hoses.
(b) Install the 2 lower radiator supports to the radiator.
(c) Attach the 2 lower radiator supports on the radiator to the body brackets.
(d) Install the 2 upper radiator supports with the 2 bolts.
Torque: 12.8 Nm (9 ft. lbs.)
(e) Connect these hoses and connectors:
^
Upper radiator hose to radiator.
^
Lower radiator hose to water inlet.
^
Radiator reservoir hose to radiator.
^
A/T: 2 oil cooler hoses to oil cooler pipes.
^
No. 1 electric cooling fan connector.
^
No.2 electric cooling fan connector.
^
ECT switch connector for electric cooling fan.
4. Fill with engine coolant.
5. Start engine and check for coolant leaks.