Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
b. Install the vehicle speed sensor drive gear to the transaxle case side.
c. Using SST and a press, install a new side bearing to the transaxle case side.
SST 09316 - 60011 (09316 - 00011), 09350 - 3201 4 (09351 - 32120)
NOTICE: Install the black cage bearing on the vehicle speed sensor drive gear side.
4. Adjust differential case side bearing preload.
a. Install the differential to the transaxle case.
b. Install the transmission case.
c. Install and torque the case bolts.
Torque: 29 N.m (300 kgf/cm, 22 ft. lbs.).
d. Install the shim into the transmission case.
e. Install the bearing retainer without an O-ring.
f.
Install and torque the 6 bolts.
Torque: 18 N.m (185 kgf/cm, 13 ft. lbs.).
g. Using SST and a torque wrench, measure the preload.
SST 09564 - 32011
Preload (at starting): 0.8-1.6 N.m (16 kgf/cm, 6.9-13.9 inch lbs.).
-
If the preload is not within the specification, remove the transmission case side bearing retainer.
Select another shim.
