Camry Coupe 2-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-452002.png)
7.
Install the air tube and wire clamp with the three bolts.
Removal Of Air Tube
8.
Connect the Air hose from the A/C air switching valve, if equipped with A/C; connect the two air hose from the PS pump.
Disconnecting Vacuum Hoses
9.
Connect the vacuum sensor hose to the intake chamber, the brake booster vacuum hose from air intake chamber, and vacuum sensing hose.
10.
If equipped with A/C, connect the A/C magnet switch VSV connector.
Removal Of EGR Components
11.
Install the EGR valve with a new gasket, then torque the bolts to 13 Nm (9 ft lb). Connect the union nut, then torque the union nut to 59 Nm (43 ft
lb).
12.
Install the EGR vacuum modulator to the clamp.
Connecting Vacuum Hose Clamps
