Camry Coupe 2-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-1474007.png)
6. INSTALL SNAP RING
a. Select a snap ring that will allow minimum axial play.
b. Using a screwdriver and hammer, tap in the snap ring.
7. INSPECT 4TH GEAR THRUST CLEARANCE
Using a feeler gauge, measure 4th gear thrust clearance.
Standard clearance: 0.20 - 0.45 mm (0.0079 - 0.0177 in.)
