Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
Housing Assembly HVAC: Service and Repair
REMOVAL
1. Remove glove compartment.
2. Remove Electronic Control Unit (ECU) and ECU bracket.
3. Remove connector bracket.
a. Disconnect the connector from the connector bracket.
b. Remove the two screws and the bracket.
4. Remove blower unit.
a. Disconnect the connector from the blower unit.
b. Disconnect the air inlet damper control cable.
c. Remove the three screws, one nut and the blower unit.
Installation is in reverse order of removal.