Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
15. IF REUSING TIMING BELT, CHECK INSTALLATION MARKS ON TIMING BELT
-
Check that there are 3 installation marks and front mark on the timing belt.
-
If the installation and front marks have disappeared, before removing the timing belt, place 3 new installation marks on the timing belt to
match the timing marks of the timing pulleys, and place a new front mark on the timing belt.
16. REMOVE TIMING BELT TENSIONER
-
Alternately loosen the 2 bolts, and remove them, the tensioner and dust boot.
17. REMOVE TIMING BELT
18. REMOVE CAMSHAFT TIMING PULLEYS
(a) Using SST, remove the bolt and RH timing pulley.
SST 09249-63010,09960-10010 (09962-01000, 09963-01000)
(b) Using SST. remove the LH timing pulley.
SST 09960-10010 (09962-01000, 09963-01000)
HINT: Arrange the camshaft timing pulleys (RH and LH sides).
19. REMOVE NO.2 IDLER PULLEY