Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
/Page-296002.png)
4. INSPECT HIGH-TENSION CORD RESISTANCE
(a) Using an ohmmeter, measure the resistance.
Maximum resistance: 26k Ohms per cord
(b) If the resistance is greater than maximum, check the terminals. If necessary, replace the high-tension cord.
5. REINSTALL HIGH-TENSION CORD SET
6. RECONNECT HIGH-TENSION CORDS TO IGNITION COILS
(a) Assemble the holder and grommet.
(b) Align the spline of the ignition coil with the spline of the holder, and push in the cord.
