Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
/Page-1528005.png)
(c) Install the bearing and suspension support.
(d) Using SST to hold the suspension support, install a new nut. SST 09729-22031
Torque: 49 N.m (500 kgf.cm, 36 ft.lbf)
(e) Remove the SST from coil spring.
NOTICE: Check that the bearing fits into the recess in the suspension support.
FRONT SHOCK ABSORBER INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation. check front wheel alignment.
