Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
![background image](/toyota/camry_le_sedan/l4-2164cc_2.2l_dohc_(5s-fe)_mfi/Page-1241001.png)
Condenser Fan: Testing and Inspection
ON-VEHICLE INSPECTION
1. INSPECT CONDENSER FAN OPERATION
Inspect the fan operation, as shown in the chart below.
Test conditions:
-
Ignition switch ON
-
Blower speed control switch position "HI"
-
A/C switch ON
If operation is not as specified, proceed next inspection.
2. INSPECT CONDENSER FAN MOTOR OPERATION
a. Disconnect the fan connector.
b. Connect the battery and ammeter to the connector, as shown in the illustration.
c. Check that the fan rotates smoothly, and then check that the reading on the ammeter.
Specified amperage: 10.1 ± 1.8 A at 20 °C (68 °F)
-
If operation is not as specified, replace the fan motor.
-
If operation is as specified, check the pressure switch, cooling fan relays and engine coolant temp. switch.