Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1247004.png)
8. DISCONNECT AIR MIX DAMPER CONTROL CABLE
NOTE: When the air mix damper control cable Is disconnected, should not bend the cable.
9. REMOVE A/C CONTROL ASSEMBLY
Remove the 4 screws and pull out the A/C control assembly, then disconnect the connector.
INSTALLATION
Installation is in the reverse order of removal.
1. AFTER INSTALLATION INSPECT A/C CONTROL LEVER AND DIAL OPERATION
Move the control dial left and right and check fro stiffness and binding through the full range of the dial.
If there is stiffness or binding, proceed next step.
2. ADJUST A/C CONTROL CABLE
a. Set the temperature control dial in "MAX. COOL" position.