Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1250001.png)
Control Module HVAC: Testing and Inspection
Air Conditioning Amplifier
ON-VEHICLE INSPECTION
1. REMOVE GLOVE COMPARTMENT
2. INSPECT AMPLIFIER CIRCUIT
a. Disconnect the amplifier connector and inspect the connector on wire harness side, as shown in the chart below. Test conditions:
-
Ignition switch ON
-
Blower speed switch HI Temperature control lever Max. Cool
If circuit is as specified, try replacing the amplifier with a new one. If the circuit is not as specified, inspect the circuits connected to other
parts.
