Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
Continuity And Resistance Check
If the circuit has diodes, reverse the two leads and check again.
When contacting the negative lead to the diode positive side and the positive lead to the negative side, there should be continuity.
When contacting the two leads in reverse, there should be no continuity.
Continuity And Resistance Check
C. Use a volt/ohmmeter with high impedance (10 k ohm/V minimum) for troubleshooting of the electrical circuit.
Finding A Short Circuit
Finding A Short Circuit
Finding A Short Circuit
A. Remove the blown fuse and disconnect all loads of the fuse.