toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 5995 > < Component Tests and General Diagnostics|Page 5993
Page 4
background image

e. Check that the buzzer stops sounding.

f.

Connect the negative (-) lead from the battery to terminal 6.

g. Disconnect the negative (-) lead from the battery to terminal 5.
h. Check that the buzzer stops sounding.

If operation is not as specified, replace the relay.

4. Key unlock warning system:

INSPECT INTEGRATION RELAY (TYPE B) OPERATION

a. Connect the positive (+) lead from the battery to terminal 1.
b. Connect the negative (-) lead from the battery to terminals 5, 6 and 10.
c. Check the buzzer sounds.

d. Disconnect the negative (-) lead from the battery to terminal 6.
e. Check that the buzzer stops sounding.

f.

Connect the negative (-) lead from the battery to terminal 6.

Component Tests and General Diagnostics|Page 5995 > < Component Tests and General Diagnostics|Page 5993