toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Back-Up Light <--> [Backup Lamp] > < Automatic Light Control Sensor <--> [Ambient Light Sensor]|Testing and Inspection
Page 2
background image

INSPECT AUTOMATIC LIGHT CONTROL SENSOR CIRCUIT
Connector disconnected:
Connect the wire harness side connector to the sensor and inspect wire harness side connector from the back side, as shown.

HINT: 

-

Ignition switch ON.

-

Light control switch OFF.

-

Vehicle's surroundings are bright.

If circuit is as specified, try replacing the sensor with a new one. 
If the circuit is not as specified, inspect the circuit connected to other parts.

Back-Up Light <--> [Backup Lamp] > < Automatic Light Control Sensor <--> [Ambient Light Sensor]|Testing and Inspection