Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-270001.png)
Drive Belt: Service and Repair
REMOVAL
REMOVE DRIVE BELT
a. Loosen the pivot bolt and adjusting look bolt.
Torque:
5S-FE:
Pivot bolt: 52 Nm (530 kg.cm, 38 ft.lb)
Adjusting lock bolt: 18 Nm (185 kg.cm, 13 ft.lb)
1 MZ-FE:
Pivot bolt: 56 Nm (570 kg.cm, 41 ft.lb)
Adjusting lock bolt: 18 Nm (185 kg.cm, 13 ft.lb)
b. Loosen the drive belt tension by adjusting bolt and remove the drive belt.
INSTALLATION
Installation is in the reverse order of removal.
