Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
![background image](/toyota/camry_le_sedan/l4-2164cc_2.2l_dohc_(5s-fe)_mfi/Page-755001.png)
Fuel Pump Relay: Testing and Inspection
CIRCUIT OPENING RELAY
INSPECTION
1. REMOVE RELAY BOX COVER
2. REMOVE CIRCUIT OPENING RELAY (Marking: CIR OPN)
3. INSPECT CIRCUIT OPENING RELAY
a. Inspect the relay continuity.
1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
-
If there is no continuity, replace the relay.
2. Check that there is no continuity between terminals 3 and 5.
-
If there is continuity, replace the relay.
b. Inspect the relay operation.
1. Apply battery positive voltage across terminals 1 and 2.
2. Using an ohmmeter, check that there is continuity between terminals 3 and 5.
-
If there is no continuity, replace the relay.
4. REINSTALL CIRCUIT OPENING RELAY
5. REINSTALL RELAY BOX COVER