Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1392003.png)
-
Connection of the connector is done after the sensor assembly has been installed.
-
Make sure the sensor is installed with the specified torque.
-
If the sensor has been dropped, or there are cracks, dents or other defects in the case, brackets or connector, replace the removed sensor
with a new one.
-
The front sensor is equipped with an electrical connection check mechanism. Be sure to lock this mechanism securely when connecting the
connector. If the connector is not securely locked, a malfunction code will be detected by the diagnostic system.
b. Connect the front airbag sensor connector.
2. INSTALL HEAD LIGHT LH AND RH
3. INSTALL TURN SIGNAL LIGHT LH AND RH
