Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
Place the dust cover and using a torx wrench (T30), torque the 4 bolts.
Torque: 8.3 Nm (85 kgf.cm, 74 inch lbs.)
3. INSTALL FRONT AXLE HUB
Using SST and a press, install the axle hub.
SST 09310-35010, 09608-32010
4. INSTALL LOWER BALL JOINT
a. Install the lower ball joint and torque the nut.
Torque: 123 Nm (1,250 kgf.cm, 90 ft. lbs.)
b. Install a new cotter pin.
5. INSTALL DUST DEFLECTOR
Using SST and a hammer, install a new dust deflector.
SST 09316-60011 (09316-00011, 09316-00041), 09608-32010
HINT: Align the holes for the ABS speed sensor in the dust deflector and steering knuckle.