Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
b. Using (SST) 09213 - 54015 (91651 - 60855), 09330 - 00021, install the pulley bolt.
Torque: 215 Nm (159 ft. lbs.)
16. Install No.2 generator bracket.
Install the generator bracket with the pivot bolt and nut. Do not tighten the bolt yet
Torque: (Nut) 28 Nm (21 ft. lbs.)
17. Install No.2 RH engine mounting bracket, engine moving control rod, No.2 RH engine mounting stay (M/T) and RH engine mounting stay.
18. Connect ground strap connectors.
19. Connect engine coolant reservoir hose to water outlet.
20. Install PS pump drive belt.
21. Install generator drive belt.
22. Install RH fender apron seal.
23. Install RH front wheel.
24. Vehicle road test.
Check for abnormal noise shock, slippage, correct shift points and smoothly operation.