Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-1826001.png)
Condenser Fan: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE FAN
Remove the clip and fan.
NOTE: When removing the clip and fan, do not apply too much force to the motor shaft. And do not scratch the motor shaft.
HINT: Install a new clip from the side opposite the protrusion on the fan.
2. REMOVE FAN MOTOR
a. Disconnect the lead wire from the fan shroud.
b. Remove the 3 screws and fan motor.
REASSEMBLY
Reassembly is in the reverse order of disassembly.