Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
Control Assembly: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE A/C SWITCH AND DEFOGGER SWITCH
Using a screwdriver, release the claw and pull out the switch backward.
HINT: Tape the screwdriver tip before use.
2. REMOVE THESE PARTS:
a. Heater control knobs
b. Heater control cable
3. REMOVE BLOWER SPEED CONTROL SWITCH
Remove the 2 screws and pull out the switch.
4. REMOVE MODE SWITCH
Remove the 2 screws and pull out the switch.
5. REMOVE HEATER CONTROL NAME SHEET
a. Remove the 2 screws.
b. Using a screwdriver, release the 4 claws and heater control name sheet.
HINT: Tape the screwdriver tip before use.
REASSEMBLY
Reassembly is in the reverse order of removal.