Testing and Inspection of Evaporator Core for Camry LE Sedan V6-30L (1MZ-FE)
Evaporator Core: Service and Repair
REMOVAL
1. REMOVE A/C UNIT
2. REMOVE EXPANSION VALVE
3. REMOVE EVAPORATOR
a. Remove the grommet from the evaporator.
b. Using a knife, cut off each packing
c. Remove the 12 screws and separate the heater cases, then remove the evaporator.
HINT: At the time of installation, please refer to the following items.
^
If evaporator is replaced, add compressor oil to compressor
Add 40-50 cc (1.4 - 1.7 fl.oz.)
Compressor oil: ND-OIL 8 or equivalent
^
If heater cases are separated, water seal should be thrown away
d. Release the 4 claws and remove the plate from the evaporator.
INSTALLATION
Installation is in the reverse order of removal.