Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
Wheel Bearing: Technical Service Bulletins
Rear Hub Bearing O-Ring - Service Tip
SUSPENSION
SU001-02
Title:
REAR BEARING 0-RING SERVICE TIP
Models:
'97 - '01 Camry, '00 - '02 Avalon & '99 - '02 Solara
March 1, 2002
Introduction
When replacing the rear hub bearing assemblies on 1997 - 2001 model year Camry, 2000 - 2002 Avalon and 1999 - 2002 Solara vehicles, replace the
0-ring.
Applicable Vehicles
^
1997 - 2001 model year Camry vehicles.
^
2000 - 2002 model year Avalon vehicles produced before the VIN shown below.
^
1999 - 2002 model year Solara vehicles produced before the VIN shown below.
Production Change Information
Parts Information
Warranty Information
Repair Procedure
REMOVAL
1.
Remove Rear Wheel.
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
2.
With Disc Brake:
Remove Brake Caliper and Disc.
A.
Remove the brake caliper and disc.
Torque: 47 N.m (475 kgf.cm, 34 ft.lbf)
B.
Support the brake caliper securely.
3.
With Drum Brake:
Remove Brake Drum.
4.
Remove Rear Axle Hub.