Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-77001.png)
Starter Relay: Testing and Inspection
REMOVE RELAY BOX COVER
REMOVE STARTER RELAY (Marking: ST)
INSPECT STARTER RELAY
a. Inspect the relay continuity
1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
2. Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
b. Inspect the relay operation.
1. Apply battery positive voltage across terminals 1 and 2
2. Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.
REINSTALL STARTER RELAY
REINSTALL RELAY BOX COVER
