Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-1389002.png)
1. COAT PISTON WITH LITHIUM SOAP BASE GLYCOL GREASE, AS SHOWN
2. INSTALL PISTON WITH SPRING INTO CYLINDER
3. INSTALL BOOT WITH PUSH ROD TO CYLINDER
4. INSTALL BLEEDER PLUG
Torque: 8.4 Nm (85 kgf-cm, 74 inch lbs.)
INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation, bleed clutch system.
