toyota Workshop Repair Guides

Toyota Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

d. Adjust the park/neutral position switch.

e. Install the transaxle control shaft lever and washer.
f.

Install and torque the nut.

Torque: 15 Nm (150 kgf-cm, 11 ft. lbs.)

g. Install the control cable and nut.

Torque: 15 Nm (150 kgf-cm, 11 ft. lbs.)

h. Install the clip to the shift control cable.

4. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
5. TEST DRIVE VEHICLE

Transmission and Drivetrain > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Diagrams > Page 5178

< PREV PAGE NEXT PAGE >