Camry LE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Receiver Dryer: Service and Repair
REMOVAL
1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
INSTALLATION HINT: Evacuate air from refrigeration system. Charge system with refrigerant and inspect for leakage of refrigerant.
Specified amount:
800 ± 50 g (28.22 ± 1.76 oz.)
2. DISCONNECT 2 LIQUID TUBES FROM RECEIVER
Remove the 2 bolts and both tubes.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
REMOVAL NOTE: Cap the open fillings immediately to keep moisture or dirt out of the system.
INSTALLATION HINT: Lubricate 2 new O-rings with compressor oil and install the tubes.
3. REMOVE RECEIVER
a. Remove the holder bolt and pull out receiver downward.
INSTALLATION HINT: If receiver was replaced, add compressor oil to compressor.
Add 20 cc (0.71 fl.oz.)
Compressor oil:
ND-OIL 8 or equivalent
b. Remove the 2 bolts and holder.
INSTALLATION
Installation is in the reverse order of removal.
