toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Interior Moulding / Trim > < Towing - Guide|Page 3304
Page 3
background image

^

If in an emergency situation towing with the front wheels on the ground is required, the key should be in the "ACC" position.

^

Vehicle should have the park brake released and the transmission placed in the Neutral position.

^

On 4WD models, the transfer case shifter should be set in the "H2" position. If equipped with manual locking hubs, they should be set in the
"FREE WHEEL mode."

Truck

^

It is recommended that the vehicle be towed by a flatbed towing vehicle or a tow dolly whenever possible.

^

Vehicle should have the Drive shaft disconnected and securely attached to the chassis if it is towed more than 50 miles or over 30 mph.

^

Automatic transmission fluid level should be in the hot temperature range on the dip stick.

^

Vehicle should not be towed from the rear without using a towing dolly for the front wheels.

^

If in an emergency situation towing with the front wheels on the ground is required, the key should be in the "ACC" position.

^

Vehicle should have the park brake released and the transmission placed in the Neutral position.

^

On 4WD models, the transfer case shifter should be set in the "H2" position. If equipped with manual locking hubs, they should be set in the
"FREE WHEEL mode."

4RUNNER

^

It is recommended that the vehicle be towed by a flatbed towing vehicle or a tow dolly whenever possible.

^

Vehicle should have the Drive shaft disconnected and securely attached to the chassis if it is towed more than 50 miles or over 30 mph.

^

Automatic transmission fluid level should be in the hot temperature range on the dip stick.

^

Vehicle should not be towed from the rear without using a towing dolly for the front wheels.

^

If in an emergency situation towing with the front wheels on the ground is required, the key should be in the "ACC" position.

^

Vehicle should have the park brake released and the transmission placed in the Neutral position.

^

On 4WD models, the transfer case shifter should be set in the "H2" position. If equipped with manual locking hubs, they should be set in the
"FREE WHEEL mode."

Van

^

It is recommended that the vehicle be towed by a flatbed towing vehicle or a tow dolly whenever possible.

^

Vehicle should have the Drive shaft disconnected and securely attached to the chassis if it is towed more than 50 miles or over 30 mph.

^

Automatic transmission fluid level should be in the hot temperature range on the dip stick.

^

Vehicle should not be towed from the rear without using a towing dolly for the front wheels.

^

If in an emergency situation towing with the front wheels on the ground is required, the key should be in the "ACC" position.

^

Vehicle should have the park brake released and the transmission placed in the Neutral position.

^

On 4WD models, the transfer case shifter should be set in the "H2" position. If equipped with manual locking hubs, they should be set in the
"FREE WHEEL mode."

Interior Moulding / Trim > < Towing - Guide|Page 3304