Camry Sedan L4-2.0L (3S-FE) (1987)
/Page-883001.png)
Compressor Clutch: Service and Repair
DISASSEMBLY
1. Remove pressure plate.
a. Using SST 07112-76060 and a socket, remove the shaft bolt.
b. Install SST 07112-66040 to the pressure plate.
c. Using SST 07112-76060 and a socket, remove the pressure plate.
d. Remove the shims from the pressure plate.
2. Remove rotor.
a. Using SST 07114-84020, remove the snap ring.
b. Using a plastic hammer, tap the rotor off the shaft.
CAUTION: Be careful not to damage the pulley when tapping on the rotor.
3. Remove stator.
a. Disconnect the stator lead wire from the compressor housing.
