Camry Sedan L4-2.0L (3S-FE) (1987)
/Page-545001.png)
Cold Start Injector: Testing and Inspection
ON-VEHICLE INSPECTION
INSPECT RESISTANCE OF COLD START INJECTOR
(a) Disconnect the cold start injector connector.
(b) Using an ohmmeter, measure the resistance between the terminals.
Resistance: 2 - 4 ohms
If the resistance is not as specified, replace the injector.
(c) Reconnect the cold start injector connector.
OFF-VEHICLE INSPECTION
1. INSPECT INJECTION OF COLD START INJECTOR
WARNING: Keep clear of sparks during the test.
