Camry Sedan L4-2.0L (3S-FE) (1987)
(r) Stop the engine. Check that the fuel pressure remains 1.5 kg/cm2 (21 psi, 147 kPa) or more for 5 minutes after the engine is turned off.
If pressure is not as specified, check the fuel pump, pressure regulator and/or injector.
(s) After checking fuel pressure, disconnect the battery negative (-) cable and carefully remove the SST to prevent gasoline from splashing.
SST 09268-45011
(t) Install the cold start injector pipe with new four gaskets and two union bolts.
Torque: 180 kg-cm (13 ft-lb, 18 Nm)
(u) Reconnect the cold start injector connector.
(v) Reconnect the cable to the negative (-) terminal of the battery.
(w) Check for fuel leakage.