toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Cold Start Injector Time Switch <--> [Thermo Time Switch] > < Throttle Position Sensor|Specifications|Page 1727

Camry Sedan L4-2.0L (3S-FE) (1987)

Page 1
background image

Throttle Position Sensor: Adjustments

THROTTLE POSITION SENSOR ADJUSTMENT 

(a) Loosen the two set screws of the sensor.

(b) Insert a 0.6 mm (0.024 in.) thickness gauge, between the throttle stop screw and stop lever.
(c) Connect the test probe of an ohmmeter to the terminals IDL and E2 of the sensor.
(d) Gradually turn the sensor clockwise until the ohmmeter deflects, and secure it with the two screws.

(e) Recheck the continuity between terminals IDL and E2.

Cold Start Injector Time Switch <--> [Thermo Time Switch] > < Throttle Position Sensor|Specifications|Page 1727