Camry Sedan L4-2.0L (3S-FE) (1987)
Distributor: Service and Repair
REMOVAL OF DISTRIBUTOR
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF BATTERY
2. REMOVE AIR CLEANER HOSE
3. DISCONNECT DISTRIBUTOR CONNECTORS
4. DISCONNECT HIGH-TENSION CORDS FROM SPARK PLUGS
5. REMOVE DISTRIBUTOR
-
Remove the two hold-down bolts and pull out the distributor.
-
Remove the 0-ring.
INSTALLATION OF DISTRIBUTOR
1. SET NO.1 CYLINDER TO TDC/COMPRESSION d
-
Turn the crankshaft clockwise, and position the slit of the intake camshaft as shown.
2. INSTALL DISTRIBUTOR