Camry Sedan L4-2.0L (3S-FE) (1987)
/Page-138001.png)
Throttle Position Sensor: Adjustments
THROTTLE POSITION SENSOR ADJUSTMENT
(a) Loosen the two set screws of the sensor.
(b) Insert a 0.6 mm (0.024 in.) thickness gauge, between the throttle stop screw and stop lever.
(c) Connect the test probe of an ohmmeter to the terminals IDL and E2 of the sensor.
(d) Gradually turn the sensor clockwise until the ohmmeter deflects, and secure it with the two screws.
(e) Recheck the continuity between terminals IDL and E2.
