Camry Sedan L4-2.0L (3S-FE) (1987)
Throttle Valve Cable/Linkage: Service and Repair
REMOVAL OF THROTTLE CABLE
1. DISCONNECT THROTTLE CABLE
a. Disconnect the cable housing from the bracket.
b. Disconnect the cable from the throttle linkage.
2. REMOVE NEUTRAL START SWITCH
a. Remove the clips and, disconnect the transmission control cable from manual shift lever.
b. Remove the manual shift lever.
c. Remove the neutral start switch.
3. REMOVE VALVE BODY
4. PULL THROTTLE CABLE OUT OF TRANSMISSION CASE
a. Remove the bolt and retaining plate.
b. Pull the cable out of the transmission case.
INSTALLATION OF THROTTLE CABLE