Camry Sedan L4-2.0L (3S-FE) (1987)
/Page-1172001.png)
Window Regulator: Technical Service Bulletins
Windows - Wire Type Regulator Assembly Installation
REF.: BODY
NO.: BO001-96
DATE: JANUARY 26, 1996
MODEL: COR, CEL, CAM, SUP
WIRE TYPE REGULATOR SUBASSEMBLY
The information contained in this TSB updates BO94-015 dated October 21, 1994.
Updates include:
^
The Screw type cover plate is not reusable for Celica and Supra.
^
The regulator sub-assembly Part Number has been added for U.S. production Corolla and Camry
To improve power door window serviceability on Corolla, Celica, Camry and Supra, a wire regulator subassembly is now available as separate supply
parts. See illustration.
REPAIR PROCEDURES:
^
Verify motor operates properly.
^
If the motor must be replaced, change the complete regulator assembly.
^
If motor operates properly, replace only the regulator subassembly.
Use the following procedures when replacing the subassembly. Refer to the appropriate section of the Repair Manual for window regulator removal
procedures.
WINDOW REGULATOR DISASSEMBLY:
