Camry Sedan L4-2.4L (2AZ-FE) (2003)
Parts Information
Required Tools & Equipment
NOTE
Additional SSTs may be ordered by calling SPX/OTC at 1-800-933-8335.
Repair Procedure
NOTE
This repair procedure is typical to most applications. Some differences may exist between models. Please refer to the appropriate section in the
Repair Manual for additional details.
NOTE
Seat motor/gear drive assembly MUST be replaced with the seat bolted to the floor to prevent misalignment of the left and right track guides.
1.
Adjust the seat to the full rear position and remove the front bolts that hold the seat to the floor. Remove any garnishes over the bolts if present.
2.
Adjust the seat to the full forward position and remove the rear bolts that hold the seat to the floor. Remove any garnishes over the bolts if present.
3.
Using a screwdnver remove the power reclining and slide switches.