Camry Sedan L4-2.4L (2AZ-FE) (2003)
Brake Master Cylinder: Service and Repair
OVERHAUL
1. DRAIN BRAKE FLUID
NOTICE: Wash off the brake fluid immediately if it comes into contact with a painted surface.
2. REMOVE AIR CLEANER ASSY
3. REMOVE BRAKE MASTER CYLINDER SUB-ASSY
a. Disconnect the level warning switch connector.
b. w/o ABS: Using SST, disconnect the 5 brake tubes from the brake master cylinder.
SST 09023-00100
c. w/ ABS: Using SST, disconnect the 6 brake tubes from the brake master cylinder.
SST 09023-00100
d. w/o ABS: Remove the 2 nuts, pull out the 3-way and brake master cylinder sub-assy.
e. w/ ABS: Remove the 2 nuts, pull out the 2-way and brake master cylinder sub-assy.
4. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSY
a. Pull out the master cylinder reservoir filler cap assy.
5. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
a. Pull out the master cylinder reservoir strainer.
6. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSY
a. Remove the screw and pull out the master cylinder reservoir sub-assy.
7. REMOVE MASTER CYLINDER RESERVOIR GROMMET
a. Remove the 2 master cylinder reservoir grommets.
8. REMOVE BRAKE MASTER CYLINDER KIT (W/O VSC)
a. Place master cylinder in vise.
b. Remove the O-ring.