Camry Sedan L4-2.4L (2AZ-FE) (2003)
e. Using SST, adjust the booster push rod length until the push rod lightly touches the pin head.
SST 09737-00020
18. INSTALL BRAKE MASTER CYLINDER SUB-ASSY
a. w/o ABS: Install the master cylinder sub-assy and 3-way with the 2 nuts.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
b. w/ ABS: Install the master cylinder sub-assy and 2-way with the 2 nuts.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
c. w/o ABS: Using SST and connect the 5 brake tubes to the master cylinder sub-assy.
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
SST 09023-00100
d. w/ ABS: Using SST and connect the 6 brake tubes to the master cylinder sub-assy.
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
SST 09023-00100
e. Connect the level warning switch connector.
19. FILL RESERVOIR WITH BRAKE FLUID
20. BLEED MASTER CYLINDER
SST 09023-00100
21. BLEED BRAKE LINE
22. INSTALL AIR CLEANER ASSY
23. CHECK FLUID LEVEL IN RESERVOIR
24. CHECK BRAKE FLUID LEAKAGE