Camry Sedan L4-2.4L (2AZ-FE) (2003)
a. Install a new brake booster gasket to the brake booster.
16. INSTALL BRAKE BOOSTER ASSY
a. Install the brake booster with the 4 nuts.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
17. INSTALL FRONT BRAKE TUBE NO. 5
a. Using SST and install the front brake tube No. 5.
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
SST 09023-00100
18. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS
a. Install the push rod clevis and lock nut.
19. INSTALL PUSH ROD PIN
a. Install the push rod pin and clip.
HINT: Apply the lithium soap base glycol grease to the part indicate by arrow.
20. INSTALL INSTRUMENT PNL INSERT SUB-ASSY LWR LH
21. INSTALL INSTRUMENT PANEL SUB-ASSY UPPER
22. INSTALL COWL SIDE TRIM SUB-ASSY LH
23. INSTALL FRONT DOOR SCUFF PLATE LH
24. INSTALL VACUUM HOSE ASSY
a. Install the vacuum hose and vacuum hose bracket to the body with a bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
b. Connect the vacuum hose to the brake booster with the clip.