Camry Sedan L4-2.4L (2AZ-FE) (2003)
![background image](/toyota/camry_sedan/l4-2.4l_(2az-fe)/Page-341014.png)
E. Insert the nozzle all the way into the bolt hole and spray brake cleaner into the hole in order to flush out the cutting particles from inside it.
F. Return the cylinder block to a tilted position as shown in Figure 23.
G. Repeat steps 9B through 9F until the marking on the core drill is aligned with the top surface of the drill bushing.
10. Tap the bolt hole.
A. Position the cylinder block vertically.