Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-377006.png)
a. Turn the crankshaft counterclockwise 90°, and align an adjusting hole of the oil pump drive shaft gear with the groove of the oil pump.
b. Put a bar ([diameter]4 mm) in the adjusting hole of the oil pump drive shaft gear to lock in position, and remove a nut.
c. Remove the bolt, chain tensioner plate and spring.
d. Remove the chain tensioner, oil pump drive shaft gear and No.2 chain.
36. INSTALL NO.2 CHAIN SUB-ASSY
a. Set the crankshaft key into the left horizontal position.
b. Turn the cutout of the drive shaft to the top.
