Camry Sedan L4-2.4L (2AZ-FE) (2003)
NOTE
On some models, DTCs may set as a result of reprogramming. If DTCs are present, clear codes and run the Health Check again. Troubleshoot any
remaining Current, Pending, or History codes. Permanent codes will not be cleared using Techstream. Permanent codes do not illuminate the MIL
and do not require troubleshooting. They will clear during normal driving once the Universal Trip Drive Pattern is performed.
4. Attach the Authorized Modifications Label.
A. Using a permanent marker or ball point pen complete the Authorized Modifications Label and attach to the vehicle. The Authorized
Modifications Label is available through the MDC P/N 00451-00001-LBL.
B. Attach the label under the hood in the location determined by the specific TSB or Campaign.
NOTE
Wait 60 - 90 seconds for ink to set before handling.