Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-794006.png)
c. Install the position indicator slide cover to the shift lever knob.
39. INSTALL INDICATOR LAMP WIRE SUB-ASSY
a. Install the indicator lamp bulb and indicator lamp cap to the indicator lamp wire.
b. Connect the transmission control switch wire harness to the indicator lamp wire harness connector.
c. Install the indicator lamp wire to the position indicator housing lower.
d. Install the indicator lamp wire harness and connector as shown in the illustration.
40. INSTALL FLOOR SHIFT ASSY
a. Install the floor shift assy to the vehicle with the 4 bolts.
Torque: 11.8 Nm (122 kgf-cm, 9 ft. lbs.)
HINT: Tighten them in the order, A, B, C and D.
b. Connect the transmission control switch connector.
c. Connect the shift lock control computer connector.
41. CONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT
a. Connect the floor shift cable to the floor shift assy.
HINT:
^
Install it with the uneven surface facing to up.
^
Fit the claws securely.
42. CONNECT FLOOR SHIFT PARKING LOCK CABLE ASSY
