Camry Sedan L4-2.4L (2AZ-FE) (2003)
7. INSTALL TRANSMISSION VALVE BODY ASSY
a. Install the 5 shift solenoid valves with the 5 bolts.
Torque:
Bolt A: 6.6 Nm (67 kgf-cm, 58 inch lbs.)
Bolt B: 10.8 Nm (110 kgf-cm, 8 ft lbs.)
Bolt length:
Bolt A: 12 mm (0.47 inch)
Bolt B: 45 mm (1.77 inch)
b. Install the spring and check ball body.
c. Align the groove of the manual valve with the pin of lever.
d. Install the 17 bolts.
Torque: 10.8 Nm (110 kgf-cm, 8 ft. lbs.)
NOTICE:
^
Push the valve body against the accumulator piston spring and the check ball body to install it.
^
Tighten those bolts marked by * in the illustration first temporarily because they are positioning bolts.
Bolt length:
Bolt A: 25 mm (0.984 inch)
Bolt B: 41 mm (1.614 inch)
Bolt C: 45 mm (1.771 inch)
8. INSTALL VALVE BODY OIL STRAINER ASSY